-
Description
SnapPad kit 70148, permanent RV jack pads
SnapPad is a permanent jack pad that snaps onto the foot of a leveling jack and stays there. No more carrying boards, no more getting out to place blocks under each jack, and nothing left behind at the campsite.
Why fit them
- Permanent jack pad and leveler, installed once
- Adds stability and spreads the load on soft ground
- Rubber dampens vibration and the anti-slip face grips on all surfaces
- A water drainage channel clears standing water
- Made from recycled tires
- Insulates against electrical surges from indirect lightning strikes
- Protects your driveway from rust marks
- Two year warranty
Fitment is by the size and shape of your jack foot
SnapPad is sized to the foot, not to the coach. Measure your existing jack foot before ordering: the diameter on a round or octagon foot, or the length and width on a square one. The SnapPad EQ range covers 7 inch square, 8 inch square, 10 inch octagon and 12 inch round jack feet.
If you are not sure what foot you have, the EQ Systems foot pad part numbers are a shortcut. Part 70385 is a 7 by 7 inch pad, parts 7818, 7849 and 7819 are 10 by 10 inch, and parts 7821 and 7820 are 12 by 12 inch. The Jack Replacement Chart lists the foot that belongs to every EQ Systems jack, and jack feet on that chart run 8, 10, 11.5 and 12 inches across.
Warning: installing SnapPad products on non-compatible leveling systems voids the warranty and can lead to product failure, property damage or injury. EQ Systems is not responsible for issues arising from use on non-compatible systems. If there is any doubt about which kit fits your jacks, call EQ Systems at 800-846-9659 with your jack foot measurement before ordering.
Installation
One time installation. The pad snaps over the jack foot and is held there permanently, so it travels with the coach and is ready the moment the jacks come down. Nothing to store, nothing to forget.
Documents
Description
SnapPad kit 70148, permanent RV jack pads
SnapPad is a permanent jack pad that snaps onto the foot of a leveling jack and stays there. No more carrying boards, no more getting out to place blocks under each jack, and nothing left behind at the campsite.
Why fit them
- Permanent jack pad and leveler, installed once
- Adds stability and spreads the load on soft ground
- Rubber dampens vibration and the anti-slip face grips on all surfaces
- A water drainage channel clears standing water
- Made from recycled tires
- Insulates against electrical surges from indirect lightning strikes
- Protects your driveway from rust marks
- Two year warranty
Fitment is by the size and shape of your jack foot
SnapPad is sized to the foot, not to the coach. Measure your existing jack foot before ordering: the diameter on a round or octagon foot, or the length and width on a square one. The SnapPad EQ range covers 7 inch square, 8 inch square, 10 inch octagon and 12 inch round jack feet.
If you are not sure what foot you have, the EQ Systems foot pad part numbers are a shortcut. Part 70385 is a 7 by 7 inch pad, parts 7818, 7849 and 7819 are 10 by 10 inch, and parts 7821 and 7820 are 12 by 12 inch. The Jack Replacement Chart lists the foot that belongs to every EQ Systems jack, and jack feet on that chart run 8, 10, 11.5 and 12 inches across.
Warning: installing SnapPad products on non-compatible leveling systems voids the warranty and can lead to product failure, property damage or injury. EQ Systems is not responsible for issues arising from use on non-compatible systems. If there is any doubt about which kit fits your jacks, call EQ Systems at 800-846-9659 with your jack foot measurement before ordering.
Installation
One time installation. The pad snaps over the jack foot and is held there permanently, so it travels with the coach and is ready the moment the jacks come down. Nothing to store, nothing to forget.